Campbell CR23X Manual de usuario descargar pdf (Pagina 9)

may use a SC32B cable (connected to a RS 232). (Please note; you can not simple use a

RS 232 cable connector as it can not communicate with the data logger alone).

Datalogger Connections (Power Supply, Communications Cable, Thermocouple).

8. Connect a “Ground” to the CR10X data logger and then connect the power supply to the

logger. You may use any 12V source with the data logger. Please refer to the CR10X

manual for more information about the appropriate Power Supply.

9. Open PC200W, under “Station Setup” and “Current Datalogger Profile”, choose the

appropriate communications port that your CR10X is connected to. Once selected, click

“Connect”. You should see a picture of the CR10X connected to the appropriate

communications port. The

screen should confirm you

are connected. If the

connection failed, try

changing the communications

port.

Fig. 9

Connect to the Data logger.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 25 26

Sin comentarios

Campbell CR23X Manual de usuario Pagina 9