Campbell SC-USB Guía de usuario

SC-USB USB to CS I/O Opto-isolated Interface Issued: 17.12.13 Copyright © 2003-2013 Campbell Scientific Ltd. CSL 514 USE

SC-USB USB to CS I/O Opto-isolated Interface 2 provided – see Section 4. This utility can also be used to upgrade the SC-USB’s own operating system.

User Guide 3 2.3 General Specifications  Case Size 20x40x75mm (HxWxL)  Cable Length 1.5m, fitted with a Type A connector for connection to a comp

SC-USB USB to CS I/O Opto-isolated Interface 4 A separate installer program will start if you have selected the appropriate driver set for your copy o

User Guide 5 3.2 Fixing a failed installation/upgrading the drivers If you have not installed the drivers prior to plugging in the SC-USB then, depe

SC-USB USB to CS I/O Opto-isolated Interface 6 You will then be prompted as to whether to search for the driver or browse the computer. If the dri

User Guide 7 Once this part of the installation is complete you will see the following confirmation... ...click ‘Close’ to return to the Device Man

SC-USB USB to CS I/O Opto-isolated Interface 8 Right click on ‘USB Serial Port’ and click on ‘Update Driver Software’ in the menu that appears...

User Guide 9 Once this part of the installation is complete you will see the following confirmation... ...click ‘Close’ to return to the Device M

SC-USB USB to CS I/O Opto-isolated Interface 10 The installation is now complete. You can close the Device Manager and start using your SC-USB inte

User Guide 11 In some cases a PC program may not offer the SC-USB COM port in its selection list of available COM ports. Recent versions of Camp

SC-USB USB to CS I/O Opto-isolated Interface 12 tool in LoggerNet you need to Add a Root device, select the COM port option and select the relevant co

User Guide 13 4.1 Settings 4.1.1 Auto Detect (Automatic Baud Rate Detection) Auto Detect will try to connect at the highest asynchronous baud rate t

SC-USB USB to CS I/O Opto-isolated Interface 14 sessions. It is currently supported by Pakbus dataloggers and recent versions of the CR5000 operating

User Guide 15 5. Troubleshooting 5.1 Installation If when installing the SC-USB the Hardware installation wizard is not displayed immediately try re

SC-USB USB to CS I/O Opto-isolated Interface 16 Scientific became aware that many PCs have poor filtering of emissions from their USB ports. These em

CAMPBELL SCIENTIFIC COMPANIES Campbell Scientific, Inc. (CSI) 815 West 1800 North Logan, Utah 84321 UNITED STATES www.campbellsci.com • info@campbel

Guarantee This equipment is guaranteed against defects in materials and workmanship. This guarantee applies for twelve months from date of delivery.

PLEASE READ FIRST About this manual Some useful conversion factors: Area: 1 in2 (square inch) = 645 mm2 Length: 1 in. (inch) = 25.4 mm

Contents 1. Introduction ... 1 2. Technical Specifications ...

1 SC-USB USB to CS I/O Opto-isolated Interface The SC-USB is designed to allow Campbell Scientific dataloggers to communicate directly with computers