
Section 3. Operations
3.19 Erasing Data Memory
To erase the flash data memory, do the following:
1) Click on the
Terminal Mode Icon.
2) At the OBS> prompt, type ‘sl 543210’ to unlock the system.
3) Type ‘ef 33’ plus Enter, then ‘ef 55’ plus Enter.
4) The erased-block-interval counter will be displayed every 100 blocks.
There are 8192 blocks and the process takes ~ 1/2 hour.
5) When done, type ‘fw’ to reset the file pointer.
By following this procedure data in the FLASH memory is erased, so be
careful!
3-15
Comentarios a estos manuales