Campbell RF410 Manual de instrucciones descargar pdf (Pagina 16)

PakBus Networking Guide

FIGURE 4. PakCom Radio Settings / OS Download

c. Select the Radio Hop Sequence decided upon for the RF400s in Step 2.

d. Select the Radio Net Address decided upon in Step 2.

e. Leave Radio Address = 0.

f. Select Radio Power Mode = RF_ON (radio not duty cycling).

g. Click Save Settings button to transfer settings to CR205.

h. Repeat Step 8 for an exact match in these settings with CR205_3.

i. At this point, the only difference between CR205_2 and CR205_3 is their

PakBus Addresses. Use PakCom to connect and check their respective

status tables to be sure.

Step 9 – Wire 109-L Temperature Sensors or Equivalent

a. Wire the 109-L temperature sensors to SE1, , and EX2 on the CR205s

per probe manual for both CR205s.

b. If you prefer to use fixed resistors to simulate temperature probes, obtain

10KΩ and 22KΩ, 5%, ¼ Watt resistors (tolerance and wattage not

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 123 124

Sin comentarios

Campbell RF410 Manual de instrucciones Pagina 16