Campbell PC208W Manual de usuario descargar pdf (Pagina 9)

MicroMet Manual Pg. 6

Setting up a Windows95/98 Computer to talk with the MicroMet

Normal operation of the MicroMet unit is fully automatic, and should require little

attention. When the site is first powered up, and before departing the site, it is a good

idea to connect to the MicroMet unit to verify that proper communication is occurring.

You can use Windows Hyperterm to talk with the MicroMet unit.

Here is what you do:

1. Start up Hyperterm (start > programs > accessories> Hyperterm).

2. Cancel the startup banner.

3. Select: file > new connection. Name the new connection MicroMet. Then OK.

4. Select Connect using: Direct to COM2 (or whichever COM port your nine pin

connector occupies)

5. Properties window pops up. Select 9600 baud, 8 bits, no parity, 1 stop bit, and no

flow control.

6. OK your way out of the properties panel.

7. You should now be all set to talk with the MicroMet.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 28 29

Sin comentarios

Campbell PC208W Manual de usuario Pagina 9