Campbell PC208W Manual de usuario descargar pdf (Pagina 19)

MicroMet Manual Pg. 16

Setting up a New Data Station in PC208W

PC208W is Campbell Scientific’s CR10X maintenance program that runs under

Windows. Before you can send a dld program to your CR10X or check on your physical

sensor readings, you must set up a connection between PC208W and the CR10X at the

site. These are the steps to follow:

! Start PC208W

! On the PC208W floating tool bar, press the SETUP button. This will bring up the

Setup Connections window.

! On the Setup Connections window press the Add Device button. This will bring up

a window named Add New Device.

! On the Add New Device window, select CR10X datalogger then select the Com

port with which you will communicate with the CR10X. You will want to use the Com

port on your PC which has the nine pin connector. Once the CR10X and Com port

are selected, press OK.

! On the Setup Connections window, highlite and rename the datalogger name to a

name that will make sense for this site. For example Kenai_MP for Kenai Moose

pens.

! On the Setup Connections window, set the Baud Rate to 9600.

! On the Setup Connections window press Save Edits to save the new site

connection.

! Exit Setup Connections. Your new site connection is complete.

Setting your PC’s time in Windows

PC208W uses your PC’s date and time to set the data and time in the CR10X. Before

allowing PC208W to set the CR10X date and time, you must be certain that the date

and time in your PC are correctly set to Alaska Standard Time, not Alaska Daylight

Time. Follow these steps to set your PC’s date and time:

! Right click the Time on the right side of the Windows Task Bar.

! Select Adjust Date/Time from the menu that pops up.

! All Date and Time parameters may be individually highlighted and set with the

Date/Time Properties window.

! On the Date/Time Properties window press OK to apply the new date and time to

your PC.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 28 29

Sin comentarios

Campbell PC208W Manual de usuario Pagina 19