Campbell CVF4 Manual de instrucciones descargar pdf (Pagina 36)

CMP6-L, CMP10-L, CMP11-L, and CMP21-L Pyranometers

A-3

x Compass

x Step ladder

A.3.1 CVF3

To install, do the following:

1. Remove leveling screws from the pyranometer.

2. Fit the pyranometer in the upper plate of the CVF3 (see Figure A-4).

3. Use the counter sink screws, nylon rings, and nuts to secure the upper plate

of the CVF3 with the lower portion of the unit (see Figure A-4).

A-4 Pyranometer mounted to the CVF3

4. Loosely mount the pyranometer on the 27084 mounting stand. Do not

fully tighten the two mounting screws.

5. Turn the CVF3’s leveling screws bringing the bubble of the pyranometer’s

level within the ring (see Figure A-6).

Nylon Ring

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 42

Sin comentarios

Campbell CVF4 Manual de instrucciones Pagina 36