Campbell CS455 Manual descargar pdf (Pagina 12)

CS450/CS455 Pressure Transducer

3.1.2 Device Configuration Utility (version 1.12 or higher)

The Device Configuration Utility (DevConfig) allows you to change the

settings of the CS450/CS455. DevConfig is shipped on the CSI ResourceDVD

included with the CS450/CS455.

To use DevConfig, the transducer needs to be connected to the PC via the

A200 (see Section 3.1.1, Using the A200). After installing DevConfig and

connecting the transducer to the PC, select CS450 from the Device Type list

(see FIGURE 3-2).

FIGURE 3-2. Device Configuration Utility

In the PC Serial Port box, select the COM port that was assigned to the A200

(see Section 3.1.1.4, Determining which COMPort the A200 has been

Assigned). Click on the Connect button to enable communication with the

sensor. Once successfully connected, the DevConfig screen should look like

FIGURE 3-3.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 33 34

Sin comentarios

Campbell CS455 Manual Pagina 12