Campbell CS451 Manual Pagina 13

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 36
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 12
CS451/CS456 Submersible Pressure Transducer
The CS451/CS456 has two communication options: SDI-12 or RS-232. The
CS451/CS456 is shipped from the factory with both communications options
enabled; there is no configuration required. As an SDI-12 sensor, the
CS451/CS456 is shipped with an address of 0.
Two values are output by the CS451/CS456—pressure/level and temperature.
The CS451/CS456 is shipped from the factory to output pressure in psig and
temperature in degrees Celsius.
The CS451/CS456 has three nose cone options. FIGURE 5-1 shows the nose
cone options. The weighted nose cone makes the transducer easier to
submerge to depth. The NPT nose cone allows the transducer to be used in
closed-pipe applications. The nose cones can be switched out later.
Standard Nose Cone
Weighted Nose Cone
N
PT Nose Cone
FIGURE 5-1. CS451 nose cone options
7
Vista de pagina 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Comentarios a estos manuales

Sin comentarios