Campbell TE525 Manual de instrucciones

INSTRUCTION MANUAL TE525 Tipping Bucket Rain Gage Revision: 11/14 Copyright © 1990- 2014 Campbell Scientific, Inc.

TE525 Tipping Bucket Rain Gage 4. Quickstart Short Cut is an easy way to program your datalogger to measure the 107 probe and assign datalogger wirin

TE525 Tipping Bucket Rain Gage 4. Select Datalogger Model and Scan Interval (default of 5 seconds is OK for most applications). Click Next. 5. Un

TE525 Tipping Bucket Rain Gage 6. After selecting the sensor, click at the left of the screen on Wiring Diagram to see how the sensor is to be wired

TE525 Tipping Bucket Rain Gage 5.1 Wind Screen Campbell Scientific offers the 260-953 Wind Screen to help minimize the effect of wind on rain measure

TE525 Tipping Bucket Rain Gage TABLE 6-1. Specification Comparisons TE525 TE525WS TE525MM Volume per Tip1 4.73 ml (0.16 fl. oz) 8.24 ml (0.28 fl.

TE525 Tipping Bucket Rain Gage 7.2 Datalogger Programming Short Cut is the best source for up-to-date datalogger programming code. Programming code

TE525 Tipping Bucket Rain Gage • The mounting pipe must be vertical. Use a torpedo level to stand it as vertical as possible. • Take the funnel of

TE525 Tipping Bucket Rain Gage Before final leveling, press either end of the bucket down against its stop to make sure the bucket is NOT hung up in t

TE525 Tipping Bucket Rain Gage 8. Operation 8.1 Sensor Schematic FIGURE 8-1. TE525-series Rain Gage Schematic 8.2 Measurement Campbell Scientific

TE525 Tipping Bucket Rain Gage 9.2 Maintenance The funnel and bucket mechanism must be kept clean. Routinely check for and remove any foreign materi

TE525 Tipping Bucket Rain Gage 12

Appendix A. Importing Short Cut Code This tutorial shows: • How to import a Short Cut program into a program editor for additional refinement. • H

Appendix A. Importing Short Cut Code 5. The program can now be edited, saved, and sent to the datalogger. 6. Import wiring information to the progr

Appendix B. Example Programs The following example programs use a pulse channel to read the output from the rain gage. The CR1000 example will also

Appendix B. Example Programs B.2 CR200(X) Series Example Program 'Program records precipitation from one TE525 or TE525WS Rain Gage once a &ap

Appendix B. Example Programs B.3 CR1000 Control Port Example Program 'Program records precipitation from one TE525 or TE525WS Rain Gage once a

Appendix B. Example Programs B-4

Appendix C. Changing Funnels with a Different Size C.1 TE525 and TE525MM The TE525 and TE525MM rain gages use the same tipping mechanism that is ca

Appendix C. Changing Funnels with a Different Size C-2

Limited Warranty The TE525, TE525WS, and TE525MM are warranted for thirty-six (36) months subject to this limited warranty: “Products manufactured by

Campbell Scientific Companies Campbell Scientific, Inc. (CSI) 815 West 1800 North Logan, Utah 84321 UNITED STATES www.campbellsci.com • info@campbe

Assistance Products may not be returned without prior authorization. The following contact information is for US and international customers residing

Precautions DANGER — MANY HAZARDS ARE ASSOCIATED WITH INSTALLING, USING, MAINTAINING, AND WORKING ON OR AROUND TRIPODS, TOWERS, AND ANY ATTACHMENTS TO

Table of Contents PDF viewers: These page numbers refer to the printed version of this document. Use the PDF reader bookmarks tab for links to spec

Table of Contents B. Example Programs .... B-1 B.1 CR1000 Pulse Channel Example Program ...

TE525 Tipping Bucket Rain Gage 1. Introduction The TE525 Tipping Bucket Rain Gage is an adaptation of the standard National Weather Service tipping