Campbell RF400 Manual descargar pdf (Pagina 35)

RF401-series and RF430-series Spread Spectrum Radio/Modems

(4) Click on “RF401” or “RF430” for the device type in DevConfig.

(5) Select the port matching the COM or USB port on the PC in which the

radio is connected.

(6) Click on the “Connect” button on the bottom left of the DevConfig screen.

(7) Press the “Program” button on the radio, and DevConfig will display the

Deployment panel—defaulting to the RF401/RF411/RF416 or

RF430/RF431/RF432 tab (see Figure 17).

(8) Click Apply after changing settings.

5.1.2 RF401/RF411/RF416 or RF430/RF431/RF432 Tab

FIGURE 17. Default DevConfig Screen for Setting Up the RF401

radios (OS4 or higher)

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 125 126

Sin comentarios

Campbell RF400 Manual Pagina 35