Campbell NL120 Manual de usuario

NL120 Ethernet ModuleRevision: 12/10Copyright © 2006-2010Campbell Scientific, Inc.

Section 1. NL120 Ethernet Module Overview 1-6

Section 2. TCP/IP Functionality This section describes the main TCP/IP functionality of a datalogger with an NL120 attached. Additional functionalit

Section 2. TCP/IP Functionality BeginProg Scan (5,Sec,6,0) PanelTemp (PanelTemperature,250) Battery (BatteryVoltage) If not Route(4094) t

Section 2. TCP/IP Functionality BeginProg Scan(2,Sec,0,0) Socket = TCPOpen(“192.168.7.125”,6785,0) BatteryVoltage(BattVolt) PanelTemp(PTe

Section 2. TCP/IP Functionality FIGURE 2-1. Datalogger Home Page If there is a default.html file on the datalogger, this will automatically become

Section 2. TCP/IP Functionality FIGURE 2-2. FTP Root Directory FIGURE 2-3. FTP USR Directory 2-5

Section 2. TCP/IP Functionality In order to use FTP, the datalogger’s FTP User Name and FTP Password must be set. This is done using Device Configur

Section 2. TCP/IP Functionality PROGRAM ' CR1000 ' FTPClient.cr1 Public Result1, Result2 BeginProg Scan (20,Sec,1,1) Result1 = FTPCl

Section 2. TCP/IP Functionality fourth parameter is the termination character. The last parameter is the maximum number of characters to expect per

Section 2. TCP/IP Functionality 2.9 DNS The datalogger provides a DNS client that can query a DNS server to resolve a fully qualified domain name.

Warranty and Assistance The NL120 ETHERNET MODULE is warranted by CAMPBELL SCIENTIFIC, INC. to be free from defects in materials and workmanship under

Section 2. TCP/IP Functionality 2-10

Campbell Scientific Companies Campbell Scientific, Inc. (CSI) 815 West 1800 North Logan, Utah 84321 UNITED STATES www.campbellsci.com • info@campbel

NL120 Table of Contents PDF viewers note: These page numbers refer to the printed version of this document. Use the Adobe Acrobat® bookmarks tab for

Section 1. NL120 Ethernet Module Overview Campbell Scientific's NL120 Ethernet Module enables 10baseT Ethernet communications. It allows the da

Section 1. NL120 Ethernet Module Overview FIGURE 1-1. NL120 Ethernet Module 1.2 Physical Description The NL120 connects to a datalogger peripheral

Section 1. NL120 Ethernet Module Overview After powering down the datalogger, plug the NL120 into the datalogger peripheral port. Attach Ethernet ca

Section 1. NL120 Ethernet Module Overview Step 2 – LoggerNet Set-up The next step is to run LoggerNet and configure it to connect to the datalogger v

Section 1. NL120 Ethernet Module Overview Step 3 – Connect You are now ready to Connect to your datalogger using the LoggerNet Connect screen. Data