Campbell CNR4 Manual de instrucciones descargar pdf (Pagina 62)

Appendix D. CNF4 Heater/Ventilator

FIGURE D-5. Attaching the solar shield to CNF4 using four flat-head

screws

4. Once the CNF4 heater/ventilator unit is attached to the bottom side of the

CNR4, the CNF4 will cover the label that contains the serial number and

the sensitivity values for the four sensors. Affix the extra label that came

with the sensor to the bottom side of the CNF4’s anodized aluminium base

so that the label is in a visible location. See FIGURE D-6 below.

FIGURE D-6. Affixing the sensor label to CNF4

5. Connect the heater/ventilator power control cable and the mounting rod to

the CNF4, as shown in FIGURE D-7.

FIGURE D-7. Connecting the CNF4 power control cable and the

mounting rod

D-6

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 68 69 70

Sin comentarios

Campbell CNR4 Manual de instrucciones Pagina 62