
Campbell Scientic, Inc.
|
815 W 1800 N
|
Logan, Utah 84321-1784
|
(435) 753-2342
|
www.campbellsci.com
USA
|
AUSTRALIA
|
BRAZIL
|
CANADA
|
COSTA RICA
|
ENGLAND
|
FRANCE
|
GERMANY
|
SOUTH AFRICA
|
SPAIN
Copyright © 2009, 2011
Campbell Scientifi c, Inc.
Printed June 2011
Ordering Information
pH Probe
CS525-L ISFET pH Probe with user-speci ed cable length. Enter
length, in feet, after the -L. Must choose a cable termina-
tion option (see below).
Cable Termination Options (choose one)
-PT Cable terminates in stripped and tinned leads for
direct connection to a datalogger’s terminals.
-PW Cable terminates in a connector for attachment to a
prewired enclosure.
-CWS Cable terminates in a connector for attachment to a
CWS900-series interface. Connection to a CWS900-
series interface allows this sensor to be used in a wire-
less sensor network.
Solutions
25587 pH4 Bu er Solution (500 ml container). Two or more
di erent bu er solutions are required for calibration.
25586 pH7 Bu
er Solution (500 ml container). Two or more
di erent bu er solutions are required for calibration.
25588 pH10 Bu
er Solution (500 ml container). Two or more
di erent bu er solutions are required for calibration.
16349 KCl solution used for cleaning (4 oz container)
Accessories
7421 Split Mesh Cable Grip
VDIV2:1 2-to-1 Voltage Divider required when using a CR200(X)-
series datalogger
.
pH Range: 0 to 14
Power Requirements: 4.5 to 5.5 Vdc
Current Consumption: 2 mA nominal
Measurement Time: 200 ms < t
67%
< 500 ms
Output (two o
utput ranges are available)
2
Range A: 0 to +5000 mV; +2700 mV at pH7
and 25°C with a sensitivity of
270 mV to 330 mV/pH at 25°C
Range B: ±400 mV with a sensitivity of
-45 mV to -50 mV/pH at 25°C
Accuracy: ±0.1 pH with two point
calibration
Operating Temperature: 0° to 70°C
Allowed Water Pressure: 0 to 700 kPa (0 to 101.5 psi)
Maximum Cable Length: 300 m (1000 ft)
Cable Type: three-twisted pair, 24-AWG
cable with Santoprene® jacket
Sensor Material: polyaryletheretherketone
(PEEK)
Dimensions
Length: 190 mm (7.48 inches)
Diameter: 16 mm (0.63 inches)
Weight w/10 ft Cable: 318 g (11.2 oz.)
Speci cations
2
e output range used depends on which wires are connected to the datalogger. Refer to the manual for more information.
Comentarios a estos manuales