Campbell PC208W Manual de usuario descargar pdf (Pagina 14)

Manual

Recommended Directory Structure

4.1 General

For standardization and instruction purposes, this chapter proposes a Recommended Directory Structure. The user

is free to modify this if another system would better suit his or her particular computer organization. However,

the instructions presented in this manual are based on the proposed structure. Modification of it will require

corresponding adjustment of commands concerning file locations.

4.2 PC208W Files

Figure 3 presents the Recommended Directory Structure for all files related to PC208W Datalogger Support

Software. A subdivision has been made between the PC208W program files and the ones actually used in the data

processing, the ‘work’ files.

Recommended Directory Structure

The above proposition calls for the creation of a main folder called CAMPBELL on the C drive. This will consist of two

sub-folders named FILES and PC208W. The datalogger support software PC208W should be installed in the latter

one, see paragraph 3.2.

The FILES folder will be sub-divided into three parts: INPUT, OUTPUT and PARAMETER.

The INPUT sub-folder is destined for all data files retrieved from the SM192 storage module. By default these files

are give a DAT extension.

The OUTPUT sub-folder is allocated for all processed, comma separated ASCII files, with TXT extension. They

result from the separation and file restructuring exercise in Report (a.k.a. Split).

The PARAMETR sub-folder will be used to store all predefined Split files, having a PAR extension.

Use of the above mentioned files is discussed in chapter 5. The proposed structure is again illustrated in the

following Windows Explorer screen.

Figure 3: Recommended Directory Structure for PC208W and related ‘work’ files..

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 61 62

Sin comentarios

Campbell PC208W Manual de usuario Pagina 14