Campbell PC208W Manual de usuario descargar pdf (Pagina 13)

Data Retrieval, Processing and Final Storage in the Lake Victoria Basin Database

Hardware and Software Installation

3.1 Installation of SC532 Interface

Provided a PC has already been set up successfully, only one hardware item remains to be installed: the SC532

Interface. The function of this device is to connect IBM compatible computers to certain Campbell Scientific

peripherals, in this case the SM192 storage module, and convert their contents into RS232 format.

The SC532 has a 9-pin connector for linkage with the storage module and uses a 25-pin slot to connect to PC. It is

Installation of the SC532 Interface is a straight forward process. Connect the SC532 to PC using the supplied ‘25 to

9’ computer cable. The 9-pin end should be connected to the PC’s serial port 1 or 2, while the 25-pin is to be plugged

into the SC532.

Connect the 9-pin connector on the SC532 to the SM192 Storage Module using the blue, specific Campbell

Scientific SC12 storage module cable. Since the SC532 Interface runs on 110V, use a 220 - 110 transformer between

mains and the SC532 while in East Africa.

All hardware components are now installed. Make sure power is supplied to the SC532.

3.2 Installation of PC208W Datalogger Support Software

PC208W Datalogger Support Software requires Windows 95 or higher. There needs to be at least 10Mb of free hard

disk space for software installation.

Insert the PC208W floppy disk labeled 1/4 in drive A. In Windows 95, select RUN from the Start button. Type in A:\

SETUP and click the OK button. Follow the instructions given on the screen.

It is recommended to use the following Working Directory name: C:/CAMPBELL/PC208W.

Hardware and Software Installation

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 61 62

Sin comentarios

Campbell PC208W Manual de usuario Pagina 13