Campbell RavenXTG GPRS/EDGE Guía de usuario descargar pdf (Pagina 84)

Raven EDGE/GPRS for Cingular - User Guide, version 2.31 79

AT Commands: PPP/Ethernet

This group includes commands specific to PPP or Ethernet connections between the Raven and a

connected device.

*HOSTAUTH=n

*HOSTNETMASK=n.n.

n.n

*HOSTPEERIP=d.d.d.d

OSTPRIVIP=d.d.d.d

PPP/Ethernet

FIGURE 1. Common : PPP/Ethernet

Host Authentication Mode:

Use PAP or CHAP to request the user login and password during PPP or

CHAP negotiation on the host connection. The username and password set in *HOSTUID and

*HOSTPW will be used.

n=0 : Disable PAP or CHAP request (Default).

n=1 : PAP and CHAP.

n=2 :

CHAP

Subnet mask for the host interface. Allows communication with a subnet behind the host inter-

face.

n.n.n.n = subnet mask, example 255.255.255.0

t or query the IP address

that can be used to directly contact the Raven once a EDGE/GPRS

connection is established. If this value is not specified, 192.168.13.31 will be used.

d.d.d.d=local or peer IP of modem

Note: This is not normally used nor needed by user applications.

Set or query the private IP address that is to be negotiated by the EDGE/GPRS connection if

*HOSTPRIVMODE =1.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 130 131

Sin comentarios

Campbell RavenXTG GPRS/EDGE Guía de usuario Pagina 84