Campbell COM220 Especificaciones descargar pdf (Pagina 23)

Appendix A. Changing COM220 Settings

FIGURE A-4. Send OS Screen in Device Configuration

A.4 Program Examples

A.4.1 ModemCallback Example (for CR1000)

The ModemCallBack instruction is available in the CR1000 with operating

system std.12 or greater, in the CR3000 with operating system std.05 or greater

and CR800 or CR850 with operating system std.03 or greater. The following

program uses the ModemCallBack instruction to call LoggerNet every 2

minutes. The ModemCallBack instruction assumes that LoggerNet resides at

the phone number and that callback is enabled in LoggerNet Setup, both for

the comport and for the datalogger.

Public PTemp, batt_volt, Count, Result as Long

Const Abort = 0 ' False

DataTable (Test5,1,-1)

DataInterval (0,0,Sec,10)

Sample (1,batt_volt,FP2)

Minimum (1,batt_volt,FP2,0,False)

Maximum (1,batt_volt,FP2,False,False)

Sample (1,PTemp,FP2)

Minimum (1,PTemp,FP2,0,False)

Maximum (1,PTemp,FP2,False,False)

Sample (1,Count,FP2)

EndTable

BeginProg

Scan (2,Min,3,0)

Count = Count + 1

PanelTemp (PTemp,250)

Battery (Batt_volt)

A-7

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 37 38

Sin comentarios

Campbell COM220 Especificaciones Pagina 23