Campbell CS106 Manual de instrucciones Pagina 11

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 28
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 10
CS106 Barometric Pressure Sensor
5. Under the Available Sensors and Devices list, select Sensors |
Meteorological | Barometric Pressure folder. Select CS106 Barometric
Pressure Sensor. Click to move the selection to the Selected device
window. Enter the Sea Level Elevation Correction. The default units for
the sea level elevation correction is meters; this can be changed by
clicking on the Elevation Correction Units box and selecting Feet.
Defaults for the barometric pressure measurement and frequency of the
measurement are mmHg and Hourly, consecutively. These can be
changed by clicking the Barometric Pressure and Measure sensor boxes
and selecting different values.
6. After selecting the sensor, click at the left of the screen on Wiring
Diagram to see how the sensor is to be wired to the datalogger. The
wiring diagram can be printed out now or after more sensors are added.
3
Vista de pagina 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Comentarios a estos manuales

Sin comentarios