
Table 7-7 Self-Time Capture Variables
Variable
Description
-Timed
Enables or Disables the Self
-Timed Capture Trigger
relative to midnight
Start time in minutes relative to midnight
Interval between capture times in minutes. To initiate a capture
interval every 5 min set the variable to 5
No
Select Yes to include still image captures
Determines how many still images will be taken when the capture
time is reached
If the number of images (above parameter) is greater than 1, this
parameter is t
he time spacing between images
Selecting CARD enables the still images taken to be stored to the
memory card
This is the allowable space on the memory card that will be
reserved for
Still Images taken by the Self-Timed Capture (in
megabytes). A value of 1000 will reserve 1000 Mbytes. A value of
0 has the camera automatically allocate memory.
There are 2 methods of managing files
on the memory card:
* Fill and Stop will stop recording additional images once the
memory card is full or the allocated memory size is reached
* Ring memory management will start deleting the oldest files
once the memory card is full or the allocated me
mory size is
Still images for this Self
-
Timed Capture can use 1 of 2 settings.
Settings #1 and #2 can be setup with various banner, resolution and
compression values. Refer to Section 7.8
r
This is a read only field. The Name of the Main Folder where the
still image files will be stored (SelfTimed1Still)
An option is given to store images in a subfolder named by
Year_Month or Year_Month_Day. Selecting the Year_Month_Day
option has some performance advantages when a large number of
images are taken. Reducing the number of files in a folder speeds
up the storing and file management process. Speed advantages are
only noticeable if the number of files in the Year_Month folder will
exceed 1000
Selecting one of the EMAIL settings enables the
camera to transmit
the still images via EMAIL. The selected EMAIL settings should
be properly configured before using the option
Email Still Image
Settings
Setting #1
One of the two Still Image Settings can be used for the still images
tha
t are sent using the FTP
Comentarios a estos manuales