Campbell RF400 Manual de instrucciones Pagina 71

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 90
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 70
Appendix J. Monitor CSAT3 via RF400 Series
J-3
(2) Remote station
(a) Connect 12 V power supply to RF400 (can be either 120V AC
adapter or 12V Field Power Cable)
(b) Connect 9 pin male to 9 pin male null-modem cable from
CSAT3 RS-232 connector to RF400’s RS-232 connector.
(c) You are ready to start taking measurements
TROUBLESHOOTING
(1) If your readings appear off-scale, try closing CSAT32 and running it
again.
(2) If not communicating with anemometer, make sure RS-232 driver is
turned on (see CSAT3 SETUP).
Vista de pagina 70
1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 89 90

Comentarios a estos manuales

Sin comentarios