Campbell RavenXTV CDMA Manual descargar pdf (Pagina 9)

RavenXTV CDMA Sierra Wireless Cellular Modem

Dimensions

Width: 7.6 cm (3 in)

Depth: 2.5 cm (1 in)

Length: 10 cm (4 in)

Weight: <0.5 kg (<1 lb)

4. Configuration

4.1 Base Station Requirements for RavenXTV

PC running Campbell Scientific’s LoggerNet or PC400 software, with access

to the Internet.

4.2 Datalogger Site Equipment

• Raven modem with power cable (included with modem).

• Datalogger—21X, CR510, CR10(X), CR23X, CR7, CR1000, CR5000,

CR3000, CR800.

• Modem Interface

If connecting to CS I/O port:

SC105 or SC932A Interface—connects the modem to the 21X,

CR510, CR10(X), CR7, or other dataloggers’ CS I/O port.

The SC105 must be configured for use with the modem using the

Device Configuration Utility. Settings should be:

CS I/O Mode: SDC Address 7

RS-232 Mode: Modem

Baud Rate: 115.2K or 9600 baud depending on datalogger model

8 data bits, 1 stop bit, no parity

If connecting to RS-232 port:

PN 18663 Null Modem Cable—connects the modem to the

CR23X, CR3000, CR800, CR2XX, CR1000, or CR5000 RS-232

port.

• PN 14394 Raven Mounting Kit—includes mounting hardware for securing

the modem to below-referenced environmental enclosure and a 9-pin male

to 9-pin female cable.

• Antenna—the following antennas are available from Campbell Scientific.

Contact a Campbell Scientific applications technician for help in

determining the best antenna for your application.

o The 20679 is a dual-band, omnidirectional antenna for our CDMA

and GPRS digital-cellular modems. It covers both the 800-MHz band

and the 1.9-GHz band. For the 800-MHz band, the 20679 provides a

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 47 48

Sin comentarios

Campbell RavenXTV CDMA Manual Pagina 9