Campbell NL100 Manual de usuario descargar pdf (Pagina 18)

November 2005, ARM-TR-069

C-3

****************DAILY OUTPUT and LOGISTICS***************************

;

;This output, once per day, captures the serial number

;of the six probes; three Vaisala HMP-45Ds and three Rotronic MP100H.

;The Rotronic probe serial numbers are: 92781,

;92782, 92783. The Vaisala probe serial numbers are: Y3110012,

;Y3110013, Y3110014. Campbell does not allow for text values

;to be entered so we capture the Vaisala probes SNs as 0012, 0013, 0014.

;The locations of the probes in the box are also captured in variables called

;XXlocate, where XX corresponds to V1, V2, V3 for the Vaisala probes and R1, R2, R3

;for the Rotronic probes. The location of a particular probe and the serial number

;should match. For example, if Vaisala probe 0012 is V1 and it is in

;location 1 then the value of V1probeSN should be 0012 and the value of V1locate

;should be 1. The ranges of values for locations are 1 - 12. The number

;of the location is as follows, if looking down on top of the

;box with the open end at the bottom.

;

; fan fan

;

; 3 6

;

; 2 5

;

; 1 4

;

; OPEN END

;

;***********************************************************************

22: If time is (P92)

1: 0 Minutes (Seconds --) into a

2: 1440 Interval (same units as above)

3: 10 Set Output Flag High (Flag 0)

23: Set Active Storage Area (P80)^17083

1: 1 Final Storage Area 1

2: 2 Array ID

24: Real Time (P77)^22655

1: 1220 Year,Day,Hour/Minute (midnight = 2400)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 43 44

Sin comentarios

Campbell NL100 Manual de usuario Pagina 18