Campbell COM9522B Guía de usuario descargar pdf (Pagina 12)

9522B & COM9522B Iridium Data Modem

Table 1. Equipment List for Base and Remote Stations

Base Station

Remote Station

9522B L-Band Data Modem

MB3 Mounting Kit (optional)

Iridium antenna plus cable

COM9522B

Iridium SIM card (comes with modem)

9876-001 Null Modem Cable (1ft lead)

SC932A with an extra SC12 (Only required if

using CSI/O port of datalogger)

SC110 9-pin male DTE to bare leads (Only

required if using a datalogger COM Port)

1.3 Hardware Overview

Table 1 lists the hardware typically used for both a Base and Remote station. Tables

2 and 3 list common wiring for both the remote and base stations. Figures 1 to 3

represent the typical configurations of the Base and Remote stations. Please refer to

Appendix B for a thorough description of the installation procedure for both the Base

and Remote stations.

Be sure that the antenna is connected to either of the

modems before applying power, as damage to the

equipment may occur.

Table 2. Remote Station COM9522B Wiring

Hardware

ComPort

Description

Colour

Connection

9522B

Antenna

“ANT” SMA connector to antenna cable

using C2626 adaptor

COM9522B Interface

26-pin ribbon cable connector

COM9522B

Power Control

Yellow

Control Port Datalogger (5V power

trigger)

Ground

Black

G – Datalogger

Modem Power

Red

+12V (Direct to Station Power Supply)

9876-001

RS232

Serial Communications

9876-001

9-pin connector of COM9522B

SC932A

(optional)

CS I/O

“DCE Device”

SC12

9-pin connector of COM9522B

“Datalogger”

SC12

CS I/O port of Datalogger

WARNING

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 45 46

Comentarios a estos manuales

Sin comentarios

Campbell COM9522B Guía de usuario Pagina 12

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Campbell COM9522B