Campbell Garmin 16-HVS Especificaciones descargar pdf (Pagina 8)

GPS16X-HVS GPS Receiver

3. Wiring

The GPS16X-HVS connects directly to a CR800, CR850, CR1000, or CR3000

datalogger (see Figure 2 and Table 3-1). Refer to Appendix B.1 if connecting

the receiver to a CR23X. Our CR5000 and CR9000X connect to the receiver

via the SC110 and an SDM-SIO4 (see Appendix C).

If the GPS16X-HVS is to be connected to a computer to change the default

settings, an SC110 cable is needed (see Appendix A).

TABLE 3-1. Datalogger Wiring

GPS16X-HVS Datalogger Function

Red 12V Power In

Black Ground Power Ground

Yellow Ground Power Switch

White Control Port (RX) TXD

Gray Control Port (TX) PPS

Blue Ground in operation

Send data to receiver for

configuration

data

Shield Ground Shield

FIGURE 2. CR1000 to GPS16X-HVS Connection

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 35 36

Sin comentarios

Campbell Garmin 16-HVS Especificaciones Pagina 8