Campbell HydroSense II Manual de instrucciones descargar pdf (Pagina 29)

HS2 and HS2P

If the button is pressed when the GPS does not have a valid GPS sync, a

warning message is display.

This message warns that the current measurement may not be stored with an

accurate date or time. To continue and store data without GPS information,

press . To return to the main screen (p. 14) without storing, press .

10. Troubleshooting

Problem Explanation / Recommendation

Display shows “SENSOR

TIMEOUT”

continuously.

This message indicates that the HydroSense II

display has not received a response from the

sensor. Check that the connectors are mated

correctly, the pins are clean, and the connector

has not been damaged. If this problem persists,

please contact Campbell Scientific.

Display shows “NO GPS

LOCK. STORE

ANYWAY?” when

attempting to store data.

This warning indicates that the GPS has not

achieved synchronization with the GPS satellite

network. This may occur because the GPS has

been turned off, does not have a clear view of the

sky or simply has not been turned on long enough

to achieve synchronization. If selecting OK in

response to this query, data will be stored without

positional information and the date and time

information may be inaccurate.

The volumetric water

content is reported as

“---”.

“---” indicates that the water content sensor was

unable to determine the volumetric water content

for these soil conditions. Try taking the

measurement a few more times or try another

location close by. For extreme or special soils,

period can sometimes be used in conjunction

with a soil specific calibration to yield usable

results.

The main screen shows

“GPS off” in the bottom

bar.

This indicates that the GPS is turned off. Please

refer to Appendix A.14, GPS Settings (p. A-6) to

find the GPS power control.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 45 46

Comentarios a estos manuales

Sin comentarios

Campbell HydroSense II Manual de instrucciones Pagina 29

Comentarios a estos manuales

Relacionado con productos y manuales para De medición, control y control Campbell HydroSense II