Campbell CM10K Especificaciones descargar pdf (Pagina 31)

Figure 13: Cabling diagram showing 1) how to connect the cables coming from the American Vaisala sensors to the

cabling box inside the aspirated radiation shield; ground cables can be combined into one slot (e.g. black & white

into slot 3) and 2) cabling the whole system into the CR 1000 data logger.

Figure 14: Cabling diagram showing 1) how to connect the cables coming from the European Vaisala sensors to the

cabling box inside the aspirated radiation shield; ground cables can be combined into one slot (e.g. black & white

into slot 3) and 2) cabling the whole system into the CR1000 data logger.

3. Replace the top cover of the cabling box. Once the sensors are connected to the cabling

box replace the top of the box ensuring the sensor terminal cables feed out of the

rubberized wedge located on one side of the cabling box cover. Make sure that the

sensor terminal cables are not tensed inside the box and tighten the screws of the

cover to secure it firmly. If the sensor cables are too tense within the cabling box they

may come loose.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 94 95

Sin comentarios

Campbell CM10K Especificaciones Pagina 31